MADE IN CANADA
Zero-Tie Rebar Support. Designed for 4 Parallel Bars.
4-Bar Footing Chair
Master Massive Foundations with the 4-Bar Footing Chair
The Synchro 4-Bar Footing Chair is our most expansive trench support, engineered specifically for your widest and heaviest deep foundation pours, including massive commercial grade beams, extra-wide perimeter frost walls, and heavy grain bin pads. Designed for raw, uneven dirt trenches, this heavy-duty steel chair accomplishes what would normally take four separate, flimsy single-wire supports. With pre-welded, exact factory spacing that perfectly holds four parallel rebar rods, your crew can permanently put their tape measures away and reduce foundation prep labor by up to 70%.
Multi-Bar Support (3-in-1)
One chair replaces three. Synchro’s chair spans the width of the trench, holding 3 parallel bars simultaneously with a single drop.
Automatic Factory Spacing
Pre-welded exact spacing at our automated 3D CNC factory completely removes human error and the need to lay tape measures in the mud.
True "Zero-Tie" Capability
The specialized 1.5-inch deep lock slots trap the heavy rebar naturally, completely eliminating the miserable job of hand-tying wire.
4 BAR FOOTING CHAIR PLACEMENT & USAGE
Designed for extra-wide dirt trenches and heavy grade beams, the Synchro 4-Bar Footing Chair offers an incredibly fast "drop-and-pour" setup. Workers place the pre-welded chairs directly into the raw dirt trench, where the 6-inch wide "snowshoe" base prevents them from sinking or tipping over in the mud. Next, crews drop four parallel runs of heavy rebar straight into the 1-1/2" deep "zero-tie" plunge slots. Gravity securely locks the steel down, instantly providing perfectly parallel spacing across all four bars and a code-compliant 3-1/2" clearance, without a single piece of tie-wire required.
Drop. Lock. Pour.
Simply drop your heavy steel rebar into our massive 1-1/2" deep plunge slots. The steel gets physically trapped by natural gravity and friction, meaning no wire tying is needed. Our pre-welded chairs ensure your reinforcement stays exactly where the blueprint dictates—before, during, and after the concrete pump hits it.
Frequently Asked Questions
Where is this chair used?
Down inside excavated dirt trenches and deep mud.
Do I need to tie the 4 pieces of rebar?
No, the three 1.5-inch deep "Zero-Tie" lock slots hold all four bars securely through gravity and friction.
What is the overall height of the chair?
It provides a 3-1/2 inch clearance height from the dirt.
What is the spacing between the rebar rods?
Exactly 8 inches.
Will it tip over in the mud?
No, the 6-inch wide "Snowshoe" A-frame is specifically built to prevent mud-tipping.
Is the steel certified?
Yes, we use traceable Canadian steel and can provide full Mill Test Reports (MTR) for commercial compliance.
Direct Factory Ordering
Trusting an overseas supplier with your foundation’s structural integrity is a massive risk. At Synchro Wire & Fab, we manufacture every single steel chair right here in Carbon, Alberta.
We make procurement easy for the busy colony boss or construction manager. Skip the complicated digital purchase orders. Text us @ (587) 608-5451, and we will text you a formal bulk estimate within 24 hours.
